Ebm-papst S3G300-AN02-50 Manuel d'utilisateur télécharger pdf (Page 7)

Operating instructions

S3G300-AN02-50

Translation of the original operating instructions

4.3.2 Connecting cables with terminals

WARNING

Terminals and connections have voltage even with a

unit that is shut off

Electric shock

→ Wait five minutes after disconnecting the voltage at all poles

before opening the device.

; Remove the cap from the screwed cable gland.

Remove the cap only in those places where cables are inserted.

; Insert the line(s) (not included in the standard scope of delivery) into

the terminal box.

; First connect the "PE" (protective earth) connection.

; Connect the lines to the corresponding terminals.

Use a screwdriver to do so.

During the connection work, ensure that no cables splice off.

; Seal the terminal box.

4.3.3 Cable routing

No water may penetrate along the cable in the direction of the cable gland.

Fans installed lying flat

Make sure that the cable is routed in the form of a loop (water trap).

Fig. 2: Fan installed lying flat, cable routed as a water trap.

Fans installed in upright position

When routing the cable, ensure that the screwed cable glands are

arranged at the bottom. The cables must always be routed downwards.

Fig. 3: Cable routing for fans installed upright.

Item no. 51650-5-9970 · Revision 76115 · Release 2012-12-03 · Page 7 / 11

ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com

1 2 3 4 5 6 7 8 9 10 11

Operating instructions 1

Commentaires sur ces manuels

Pas de commentaire

Ebm-papst S3G300-AN02-50 Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Ebm-papst S3G300-AN02-50